Product Introduction
The Bricasti M7 is a real-time algorithmic synthesizer processor and digital reverberation unit capable of digital-to-analog conversion.
It features five categories of reverb presets: Hall, Room, Plate, Ambient Space, and Chamber, with each category containing over 200 specific reverb presets.
By integrating cutting-edge digital technology, DSP, and advanced A/D conversion with classic analog design principles, this product embodies a timeless, benchmark creation.
It offers both a standard AES 192k single-wire digital interface and high-quality analog conversion interfaces.
Specifications
| Digital Input & Output | Interface | XLR AES/EBU Standard |
| Type | AES/EBU 24-bit Single Wire |
| Microphone Input Impedance | 10,000 Ohms |
| Sample Rates | 44.1 kHz, 48 kHz, 88 kHz, 96 kHz, 192 kHz |
| Digital I/O Frequency Response | 20 Hz to 40 kHz; Max Output +23 dBu
192 kHz Sampling - DC to 96 kHz |
| Analog Input | Interface | XLR Balanced (Pin 2 Hot) |
| Impedance | 100 kOhms |
| Maximum Input Level | +24 dBu |
| Minimum Input Level | +4 dBu |
| A/D Converter | 24bit, 96 kHz |
| Dynamic Range | >117 dB, A-Weighted |
| Total Harmonic Distortion | < 0.001 % |
| Frequency Response | 10 Hz to 20 kHz, -0.002 dB |
| Common Mode Rejection Ratio | >100 dB @ 1 kHz |
| Analog Output | Interface | XLR Balanced (Pin 2 Hot) |
| Impedance | 40 Ohms |
| Maximum Output Level | +24 dBu (Balanced) |
| Full Scale Output Range | -10 dBu to +22 dBu (3 Selectable Steps) |
| D/A Converter | 24bit, 96 kHz |
| Frequency Response | 10 Hz to 20 kHz, -0.002 dB |
| Dynamic Range | >117 dB, A-Weighted |
| Chassis | Aluminum Front Panel, Stainless Steel Chassis |
| Jitter | <20 Picoseconds |
| Physical | Dimensions | 19" x 1.75" x 11" (Rack Units) / 518 × 365 × 76 mm |
